排煙罩和前端油煙凈化器的清洗方法
Cleaning method of smoke exhaust hood and front end oil fume purifier
油煙進化器排煙罩和前端油煙凈化器一般是設置為一體的。
The smoke exhaust hood of the fume evolution device and the front-end fume purifier are generally set as a whole.
部件：煙罩包含罩體和罩蓋、防爆燈，前端凈化器包括UV燈、川鐵油網、運水煙罩等。
Components: the smoke hood includes the cover body, cover and explosion-proof lamp. The front-end purifier includes UV lamp, Sichuan railway oil network, water transportation smoke hood, etc.
清洗方法：防爆燈、UV燈可以經常用濕抹布擦干凈，含有擋水板、運水扇、油網、過濾網等前端凈化部件的和排煙罩面板一樣，都需要先將表面油垢鏟干凈，然后放在火堿水里泡，待油泥完全泡除后，再用高壓水槍(清水)洗凈。據經驗證明，80%左右的廚房排煙不暢主要原因是油煙凈化器的內置過濾網不潔堵塞。所以前端凈化器的部件清潔是非常重要的
Cleaning method: the explosion-proof lamp and UV lamp can often be cleaned with wet rags. The front-end purification components including water baffle, water transport fan, oil screen, filter screen and so on, like the smoke exhaust hood panel, need to shovel the oil dirt on the surface first, and then soak it in caustic soda water. After the oil sludge is completely soaked, clean it with high-pressure water gun (clean water). According to experience, about 80% of the kitchen smoke exhaust is not smooth. The main reason is that the built-in filter screen of the fume purifier is dirty and blocked. Therefore, it is very important to clean the components of the front-end purifier
排煙管道的清洗方法
Cleaning method of smoke exhaust pipe
排煙管道.
Smoke exhaust duct
部件：包含主管道、防火閥、止回閥、調節閥、消音管道、軟連接、彎頭、三通等。
Components: including main pipe, fire damper, check valve, regulating valve, silencing pipe, soft connection, elbow, tee, etc.
清洗方法：油煙管道清洗是排煙口和煙罩相連處，和與煙罩平行的排油煙管道內部，這些地方需要清洗。清洗管道拐彎位置，例如彎頭、三通，必要時在彎頭上方開口。外部油煙管道每隔一個季度清洗一次，不過一個季度只需清潔管道彎頭。
Cleaning method: the oil fume pipe cleaning refers to the connection between the smoke exhaust outlet and the smoke hood, and the interior of the oil fume pipe parallel to the smoke hood. These places need to be cleaned. Clean the turning position of the pipe, such as elbow and tee, and open the opening above the elbow if necessary. The external oil smoke pipe shall be cleaned every other quarter, but only the pipe elbow shall be cleaned every quarter.
排煙風機/風柜的清洗方法
Cleaning method of smoke exhaust fan / air cabinet
風柜
Air cabinet
部件：風機包含電機等部件，風柜就是把風機放在柜子里，包含風機和柜體。
Components: the fan includes the motor and other components. The fan cabinet is to place the fan in the cabinet, including the fan and the cabinet.
清洗方法：清洗時，先拆開電機或拆開電機扇葉，再用鏟刀鏟干凈風機扇葉上的油污及風機里面的油渣，然后用除油劑清洗，洗完后再用清水沖洗干凈。
Cleaning method: when cleaning, first disassemble the motor or the motor fan blade, then use the shovel to clean the oil on the fan blade and the oil residue in the fan, then use the degreaser to clean, and then use clean water to clean after washing.
風機的內部和外部都要清洗，防止銹蝕。
The inside and outside of the fan shall be cleaned to prevent corrosion.
The above is Shanxi roots blower manufacturer http://www.ff14-l.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call us for consultation!
